Chevron Nails: Gel Polish and Sharpie Design with Striping Tape Tutorial with Kirsty

To make these chevron nails, you place red gel polish on a white base and draw it down into a V with a dotting tool, cure it, then colour the white area with sharpie and spray it so the colours bleed like tie dye. Striping tape edges the V and a rhinestone sits where the two pieces meet.

Update: the video uses Urban Graffiti Pop My Cherry and Glass Slipper, which are not in our store. Fire Cracker is the closest red, and Halo glitter stands in for the clear gel with blue particles.

Kirsty Meakin from Naio Nails shows an alternative sharpie nail design built around a V shape. This chevron nail art tutorial is really easy and quick, and ideal for short nails.

At a Glance

  • Design: a bold pointed block of colour beside bleeding watercolour patches, trimmed with metallic lines
  • Artist: Kirsty Meakin
  • Technique: gel polish shaping, marker pen colour dissolved with solvent, tape and stone embellishment
  • Key products: Snow White and Fire Cracker Gel Polishes, Halo Nail Art Glitter, Gel Residue Remover, Naio Nails Mega Gloss, AB Crystals
  • Video length: about 9 minutes

Why You'll Love These Chevron Nails

  • Quick and easy, and ideal for short nails.
  • A bold chevron V that needs just one coat.
  • Sharpie colours bleed into a tie dye effect.
  • Striping tape and a rhinestone add a neat finish.

Products Used in This Video

How to Create Chevron Nails

1. Prepare the base

An acrylic extension has been applied, followed by gel polish in a nice bright white, and top coat.

2. Paint the chevron

Place the red on the nail and leave a little pool of product as you bring it up. Use a dotting tool to bring the colour down into a nice V, which gives the chevron shape. Tickle it closer to the cuticle with a detail brush without flooding it. The pigment is rich, so only one coat is needed. Cure for 60 seconds in an LED lamp or two minutes in a UV lamp.

Starting the chevron V with red gel.

Shaping the chevron V with a dotting tool.

3. Wipe and add sharpie

Wipe over with gel residue remover, then add random splodges of sharpie colour. Do not go over onto the red.

Adding random sharpie colour next to the chevron.

4. Spray and merge

Spray on the remover and watch the colours merge and bleed into each other. Let it dry a little, then spray again.

5. Touch to force the colour

Using a detailing brush and solution from a dappen dish, touch little sections, which bleeds the colour more and forces it outwards. You can keep adding more sharpie colour, such as green or pink, and touch it again without spraying.

Touching the sharpie colour to bleed it further.

6. Add shimmer

Apply the shimmer over the red. The original is clear but full of blue particles, which adds shimmer and sparkle. Cure.

7. Seal the design

Go over the sharpie design with mega gloss sealer gel, then over the gel polish too, and cure. Seal before adding tape so the design is not ruined.

8. Add striping tape

Cut a small section and gently place it down to edge the chevron V, using nippers rather than scissors. Press down, snip off the excess, taking care of the skin, and repeat with another piece.

Applying striping tape to edge the chevron.

9. Add the rhinestone

Put a tiny bit of mega gloss sealer at the join, place the rhinestone right at the join and cure.

Placing a rhinestone at the striping tape join.

10. Seal the tape and finish

Top coat with mega gloss sealer, going right to the edges so the tape does not lift off the nail. This also seals the rhinestone. Cure, then apply cuticle oil.

Pro Tips

  • Do not flood the cuticle.
  • Keep the sharpie off the chevron colour.
  • Seal right to the edges of the tape so it does not lift.
  • You can keep adding more sharpie colour.

Common Mistakes

  • Letting sharpie colour bleed onto the red chevron.
  • Not sealing the striping tape all the way to its edges, so it lifts.

Who Is This Design For?

Anyone with short nails, or anyone wanting a quick, bold short nail design.

Ways to Make It Your Own

  • Choose a different chevron colour.
  • Add more sharpie shades.
  • Use a different stone.

Aftercare

Apply cuticle oil regularly.

Frequently Asked Questions

How do you make chevron nails with gel polish?

Over a white base, draw red gel polish down into a V with a dotting tool and cure, add sharpie colour beside it and spray so it bleeds, add shimmer, seal, then edge the V with striping tape, add a rhinestone and seal again.

How many coats of the red?

One, because the pigment is super rich.

Why top coat before the tape?

So the sharpie design is protected while you work on it.

How do I stop the tape lifting?

Seal it in with mega gloss sealer right to the edges.

What makes the sharpie colours bleed?

Gel residue remover, sprayed over the colour and then touched on in small drops from a dappen dish.

Why cut the tape with nippers?

Kirsty uses nippers rather than scissors to snip the tape, taking care of the skin.

Give Chevron Nails a Try

Watch the video above and try this easy design.

Artículos Relacionados